1. Open the rear door of your VholdR by pushing upwards with your thumb and then lowering the door like a drawbridge.
2. Insert the microSD card in the card slot following the alignment icon printed on the casing
3. Insert the battery into its slot and then position the latch over it to hold it in place.
4. Close the rear door (opposite action of #1)
5. Press and HOLD the rear button marked power for 2 second or until you see the front or rear lights come on.
6. Wait for the unit to boot completely, it will beep when it’s done.
7. Slide the top switch forward to begin recording (it will beep when it starts)
8. To stop recording slide the top switch backward (it will double beep when it stops).
9. To power down, press and hold the rear button for two seconds.
