This entry will explain how to use the DualSight laser alignment guide and memory and battery check functions.

1. The VholdR must be powered on.
2. The function works best when the VholdR is recording, but can be activated in either the start or stop position.

• 3. To activate the laser/check function, press the On button on the rear door.
  Note: do not hold the On button down as that will power down your VholdR.

4. The lasers and check function will show for 3 seconds.

Lasers:

1. The lasers are designed to give you an idea of where you will be shooting.
2. For best results have your VholdR mounted, be in your athletic/riding position and then press the rear button.
3. If you are outdoors the easiest way to see the lasers is to extend your hand out in front of you as far as you can to find the lasers.
4. Your lasers should make a straight horizontal line and be pointing out towards the object you want to shoot or the horizon.

• 5. Adjusting the horizon can be done by rotating the lens. Turn the front portion of your VholdR lens to the left or right to position the lasers in a horizontal line.
  Note: there is a limit of just over 90 degrees so if you reach that point its best not to keep trying to rotate your lens.
  Additional Note: Do NOT try to perform lasik surgery or shoot the lasers into anyone’s eyes for any reason, as they are strong and they will MESS YOU UP!